77
Error Messages
For fax advantage assistance, call 1-800-435-7329.
Display message Cause & solution
●
The document was not fed into the unit properly. Reinsert the
document. If misfeeding occurs frequently, clean the document
feeder rollers (p. 86) and try again.
CHECK DOCUMENT
●
The memory (telephone numbers, parameters, etc.) has been
erased. Re-program.
CHECK MEMORY
CHECK FILM
COVER OPEN
●
The recording paper is not installed or the unit has run out of
paper. Install paper and press w to clear the message.
●
The recording paper is not fed into the unit properly. Reinstall
paper (p. 13) and press w to clear the message.
●
The recording paper has jammed near the recording paper
entrance. Clear the jammed paper (p. 84) and press w to
clear the message. Do not install folded or heavily curled paper.
CHECK PAPER
●
The unit has a document in memory. See the other displayed
message instructions to print out the document.
FAX IN MEMORY
●
The memory is full of received documents due to a lack of
recording paper or a recording paper jam. Install paper or clear
the jammed paper.
●
When performing memory transmission, the document being
stored exceeds the memory capacity of the unit. Transmit the
entire document manually.
FAX MEMORY FULL
●
When making a copy, the document being stored exceeds the
memory capacity of the unit. Press { to clear the message.
Divide the document into sections.
MEMORY FULL
(continued)
●
There is no space to store new items in the directory. Erase
unnecessary items (p. 29).
DIRECTORY FULL
●
The covers are open. Close them.
●
The ink film is empty. Replace the ink film with a new one (p. 11).
●
The ink film is not installed. Install it (p.
11
).
●
The ink film is slack. Tighten it (see step 7 on page 12).
●
There is no room left in memory to record a voice message.
Erase unnecessary messages (p. 57, 58, 64).
MESSAGE FULL
●
The other party’s fax machine is busy or has run out of recording
paper. Try again.
NO FAX REPLY
●
There is something wrong with the modem circuit. Contact our
service personnel.
MODEM ERROR
