108
B. To find the waypoint, press → to
FIND ON MAP|ENT. The Map Page
appears with the cursor highlighting the found waypoint.
To clear these menus and return to the main page display, press
EXIT re-
peatedly.
5. If you're looking by name, there are two options: A. You can spell
out the name in the top selection box. Press ↑ or ↓ to change the first
letter, then press → to move the cursor to the next letter and repeat until
the name is correct, then press
ENT|ENT. B. Or jump down to the lower
selection list by pressing
ENT, then press ↓ or ↑ to select a waypoint from
the list and press
ENT. The Waypoint Information screen appears.
Find By Name menu.
A. To navigate to the waypoint, press ENT. The GO TO Waypoint
command is already highlighted. The unit will show navigation in-
formation to the waypoint.
B. To find the waypoint, press → to
FIND ON MAP|ENT. The Map Page
appears with the cursor highlighting the found waypoint.
To clear these menus and return to the main page display, press
EXIT re-
peatedly.
