Recording from an external source
1. Turn the TV and the unit on, and be sure to select the input
of the TV to which the unit is connected.
2. When y
ou want to record to a disc: Press:
Press OPEN/CLOSE A button to open the disc tray, then
place the disc to record properly.
When y
ou want to record to a tape: Press:
Insert the tape with a safety tab into the cassette compart-
ment.
3. Select the input of the unit to which the external equipment
is connected. (L2 or L1)
•To use the input jacks on the back of this unit, select “L1” position by
pressing [0],[0],[1] on the remote control or the CH K / L buttons.
•To use the input jacks on the front of this unit, select “L2” position
by pressing [0],[0],[2] on the remote control or the CH K / L but-
tons.
4. Select a recording speed using REC SPEED button.
Refer to
“Recording speed” on page 26 for DVD or page 94 for VCR.
5.Press REC/OTR button on the unit to start recording.
6.Press PLAY button on the external source to record from.
7.F
or disc:
Press STOP C button on the unit to stop recording.
F
or tape:
Press STOP/EJECT CAbutton on the unit to stop record-
ing.
This operation may take a while to be completed.
