NetSure™ ITM with eSure™ Technology
Installation Manual, Section 6040 (Issue AB, April 8, 2013)
Spec. No: 582145500
12
Section 6040
Model: NetSure™ ITM Issue AB, April 8, 2013
2.3 Recommended Tools and Test Equipment
The following tools and test equipment are recommended to install the DC UPS modules.
• Non-Contact Voltage Detector
• Digital Multimeter (DMM), 0 to 60 V dc, 0 to 600 V ac
• NO-OX-ID-A or Approved Equivalent
• Lineman's Scissors
• Lineman's Strippers
• Lineman's Cutters
• Electrician's Insulated Screwdrivers, Phillips, No. 1 and 2
• Electrician's Insulated Screwdrivers, Flat-Blade, Small and Large
• Adjustable Torque Wrench, 1/2" Drive, 0 in-lb to 800 in-lb
• Ratchet, 1/2" Drive
• Insulated Nut Driver Set
• Crimping Tool with Dies from 350 kcmil to 2 AWG
• Torx Screwdrivers or Bits: TX10 and TX20
• 17 mm Wrench or Socket for M10 Bolts and Nuts (for circuit breaker distribution)
• 19 mm Wrench or Socket for M12 Bolts and Nuts (for fuse distribution)
• 24 mm Wrench for Pallet.
• Hexagonal mm Bit for the Air Duct.
• Hexagonal Bit for the AC Input Breaker.
Contact Emerson for full turn key installation quote.
