![](https://pdfstore-manualsonline.prod.a.ki/pdfasset/8/1f/81f1a3e4-f2a8-4437-bc20-531c60b466de/81f1a3e4-f2a8-4437-bc20-531c60b466de-bg2e.png)
46
4
Enter the setting.
The Option Setup Menu reappears.
3
Select the desired setting.
Variable:
The level can be adjusted freely using the buttons on
the remote control unit.
0 dB, -40 dB:
The output level is fixed at the set level and the
volume can no longer be adjusted.
NOTE:
• When “ZONE2” is selected at System Setup Menu
“5-1.Power amp Assign”, the Zone2 vol. Level is all
set to “variable” including preout level and this
menu is not displayed.
(Main unit)
(Remote control unit)
(Main unit)
(Remote control unit)
5-3, 5-4
Setting the Trigger Out Setup
• Set the Trigger Out output 1 for the different input sources.
1
2
3
Select “Trigger Out 1 Setup” at the Option Setup
Menu.
Display to the Trigger Out 1 Setup screen.
Select the Zone (MAIN, Zone2 and Zone3).
Trigger Out 1
*Option Setup
(Main unit)
(Remote control unit)
ZONE : MAIN
*Trigger Out 1
(Main unit)
(Remote control unit)
(Main unit)
(Remote control unit)
4
(Main unit)
(Remote control unit)
(Main unit)
(Remote control unit)
5
(Main unit)
(Remote control unit)
Enter the setting
The Option Setup Menu reappears.
Set the Trigger out 2 Setup in the same way.
w Select “ON” or “OFF”.q Select the input source.