Getting Started
2 Falcon
®
5500 RFID Mobile Hybrid Computer
Introduction
The Falcon 5500 is a Falcon 4420 Windows
®
CE Color Mobile Computer
mounted with a special RFID unit. See the Falcon 4400 Series Quick Reference
Guide (QRG) and the Falcon 4400 Series Product Reference Guide (PRG) on the
Product CD included with your unit for information not discussed in this
RFID Addendum.
Getting Started
Enabling RFID
Before using your PSC RFID Tag Reader, you must enable the unit for RFID.
1. Power on the unit. Follow the on-screen instructions to calibrate the
touchscreen. See the Falcon 4400 Series PRG for more information.
2. Go to
Start > Settings > Control Panel. Double-tap the Decoding icon.
3. Select
Configure > General > Trigger Options.
Information about the symbols and formatting used in this manual are described in
the Falcon 4400 Series PRG.
CAUTION
You must charge the Falcon in the RFID-compatible dock prior to first use. The
initial charge time is approximately 24 hours. See “Charging the Batteries” in the
Falcon 4400 Series Quick Reference Guide (QRG) for more information.
