Filter
Top Products
P-2602R/RL-DxA Quick Start Guide
4
6 Push in the POWER button. Look at the lights on the front panel of the P-2602RL-DxA.
•The POWER light blinks during start-up and is green once the P-2602RL-DxA is ready.
• Each ETHERNET light turns on if the corresponding ETHERNET port is properly con-
nected. The lights blink when the P-2602RL-DxA is sending or receiving data through the
corresponding ETHERNET port.
•The DSL light stays on if a physical connection with the ISP is established. The INTER-
NET light stays on when Internet access is available.
•The PHONE lights stay on when your SIP account is registered and they blink if the
receiver is off hooked.
If PHONE 1 or PHONE 2 light is on, skip to Section 4 to see how to make calls through
the Internet.
If the INTERNET light comes on but the PHONE lights are off, go to Section 3.2 and use
the VOICE OVER INTERNET SETUP wizard.
If the INTERNET light is off but the DSL light is on, go to Section 3.1 and use the
INTERNET SETUP wizard to configure your Internet access settings.