8
INSTALLATION (CONTINUED)
Battery Installation
To hear the Disney ring when receiving a call, insert three
(3) AAA size batteries into the bottom of the unit as
described below.
NOTE: When the batteries become weak, the unit will
revert back to the standard ring.
1. Remove the Battery Compartment screw.
2. Press in on the Battery Compartment tab and lift off the
Battery Compartment cover.
3. Insert three (3) AAA size batteries, observing the polarity
as shown.
4. Replace Battery
Compartment
and screw.
+–
+–
+–
BATTERY PRECAUTIONS
Follow these precautions when using batteries in this device:
1. Use only the size and type of batteries specified.
2. Be sure to follow the correct polarity when installing the batteries as indicated in the
battery compartment. Reversed batteries may cause damage to the device.
3. Do not mix different types of batteries together (e.g. Alkaline, Rechargeable and
Carbon-zinc) or old batteries with fresh ones.
4. If the device is not to be used for a long period of time, remove the batteries to prevent
damage or injury from possible battery leakage.
5. Do not try to recharge batteries not intended to be recharged; they can overheat and
rupture.
(Follow battery manufacturer’s directions.)