Filter
Top Products
Blue Parrott B100 Wireless Headset
GLOSSARY OF TERMS
Standby Mode – Headset is on and ready to get a dial tone, answer, or end a call.
Standby Mode is automatic when removing headset from the base. Turning off the
headset while it is out of the base takes it out of Standby Mode.
Pair / Pairing – Pairing is a simple and quick procedure that enables one Bluetooth
product to communicate with another Bluetooth product. Your Blue Parrott B100
headset and base have already been paired at the factory. However, pairing is
necessary when using other Bluetooth products with Blue Parrott.
OPERATION SUMMARY
Your Blue Parrott B100 system consists of a base unit and a wireless headset.
It allows you to communicate on a phone call, hands free, via Bluetooth technology.
COMPATIBILITY INFORMATION
• Landline Phones: Compatible with all home cordless and corded telephones. However,
in the case of two-line phones, only the first line will be accessible. Call waiting and
3-way conferencing, which are services offered by your telephone service provider,
remain intact and can be activated via the headset. The telephone does not need to
be Bluetooth-enabled. Not recommended for use on digital office telephone lines.
• Bluetooth Headsets: Bluetooth headsets that have a 0000 passcode are compatible
with the Blue Parrott base. Check headset user guide for passcode information.
• Bluetooth Cellular Phones: Bluetooth cellular phones are compatible with the Blue
Parrott B100 headset when the cell phone’s pass code is set to 0000. Please consult
your phone’s user manual to set the pass code.
7
VISUAL AND AUDIO INDICATORS EXPLAINED
Headset Indicator Lights / In Base:
No lights Headset not receiving charge
Green light Operational/Full charge/Okay to use
Red Light Operational/Continual charging/Okay to use
Headset Indicator Lights / Off Base:
Yellow flashing In Standby Mode
Red light flashes every few seconds Low battery warning
Red and yellow lights flash alternately and then stop Pairing successful
Headset Audio Indicators:
3 beeps that
descend
in tone Headset off (end Standby Mode)
3 beeps that
ascend
in tone Headset on (in Standby Mode)
1 single beep Follows press of Multifunction button to
obtain a dial tone, answer, or end a call.
Mute or un-mute microphone
Series of melodic tones Incoming call
Double beep every 30 seconds Low battery warning
Base Unit Indicator Lights:
Dim green Base receiving power/not on a call
Yellow flashing Standby Mode
Yellow flashing/fast flickering green light Incoming call
Yellow flashing/bright green Call in progress
Red and orange lights flash alternately and then stop Pairing successful
No lights Unit not receiving power
20
Blue Parrott B100 Wireless Headset