Filter
Top Products
Setup
Charging of the Handset Battery
The handset of your cordless telephone is powered by
rechargeable battery. It charges automatically whenever
the handset is in its base unit.
You should charge the batteries for 10-12 hours when
you first receive your phone. You will know the battery
needs charging when:
• The low battery message is displayed:
• The handset seems completely dead, the LCD is completely clear and does not
activate when you press the keys.
IMPORTANT:
1. Do not dispose of batteries in a fire, they might explode.
2. Do not open or mutilate the batteries. Toxic substances may be released, causing
harm to eyes or skin.
3. Exercise care in handling batteries in order to prevent an accidental short of the
charge contacts, potentially causing the batteries to overheat.
4. Do not dispose of these batteries into household garbage, they should be properly
recycled.
5. Do not charge the batteries with other electrical devices.
6. If the phone will not be used for a long period of time, remove the battery to prevent
possible leakage.
Connecting to Phone Line
Plug one end of the telephone line cord into the jack on the back of the base unit. Then
plug the other end of this cord into the wall jack. Before connecting to phone line, be sure
to charge the battery for at least 12 hours.
Checking for Dial Tone
After the battery is charged, press PHONE on the handset. The LCD displays PHONE
and shows a call timer, and you will hear a dial tone. If not, see In Case of Difficulty.
Getting Started
7