VTech SP1733 Cordless Telephone User Manual


 
HEADSET OPERATION
Your Sprint cordless phone
cordless telephone is equipped with a
2.5mm Headset Jack for use with an
optional accessory Headset for hands-
free operation.
If you choose to use the Headset
option, you must obtain an optional
accessory Headset, which is compat-
ible with the Sprint cordless phone.
To purchase a Headset, call
VTech at 1-800-835-8023.
Once you have a compatible 2.5mm
Headset, locate the Headset Jack on
the Sprint cordless phone Handset.
Connect the plug on the Headset cord
to the jack on the cordless Handset.
The plug should fit securely. Do not
force the connection.
OPERATION
NOTE: Whenever a compatible
Headset is connected to the cordless
Handset, the microphone on the Hand-
set will be muted. This is done to limit
the effect of background noise.
The following operational charac-
teristics apply to Sprint Headsets. The
same may also apply to other, non-
Sprint supplied headsets, but Sprint
assumes no responsibility for their
performance.
The Sprint brand compatible Head-
set has a reversible, monaural design.
You can wear your Headset on either
ear, leaving one ear free for room con-
versation.
The headband can be adjusted to fit
the contour of your head. Using both
hands, slide the headband up or down
so that it rests comfortably on your
head, with the speaker cushion
centered against your ear.
For maximum sound quality, the flex-
ible microphone should be positioned
at the corner of your mouth, about one
inch from your face.
BELT CLIP
The Sprint cordless phone is also
equipped with a detachable belt clip.
Align the pins on the inside edge of the
clip with the notches on the sides of the
Sprint cordless phone Handset. The
belt clip should snap securely into
place. Do not force the connection.
34