VTech MI6896 Cordless Telephone User Manual


 
www.vtechphones.com
30
Handset settings
The handset will
not ring when a
call comes in if
ringer volume
is at the lowest
setting.
Ringer volume
• With the handset in idle (off) mode, press MENU then press or
until RINGER VOLUME is shown.
• Press SEL. You will hear a sample of the ringer.
• Press , or a digit (0 through 6). You will hear a sample of the
new ringer volume and the volume bar will be increased or decreased
each time the setting is adjusted. At the lowest setting the display will
show:
- OR -
• With the handset in idle (off) mode, press or of the volume control
on the side of handset will directly go to ringer volume menu.
• Press or to adjust the ringer volume and the ringer volume will
be saved automatically.
Ringer tone
With the handset in idle (off) mode, press MENU then press or
until RINGER TONE is displayed.
Press SEL. Then press , or a digit (0 through 9) to sample the ring
tones.
Press SEL to conrm.
Key tone
With the handset in idle (off) mode, press
MENU
then press or to
until KEY TONE
is displayed.
Press SEL. The current setting will be shown. Press or to see
ON or OFF. When set to ON, the handset will emit a beep whenever
a key is pressed.
When the desired option is shown, press SEL. Key tone is preset to
ON.