www.vtechphones.com
20
Handset operation
• To end the call, press INT or OFF on either handset, or place the
handset back in its telephone base.
If the called handset is out of range or on an external call, when paged,
the display of the calling handset will show:
Call forward
An external call can be forwarded or transferred from one
handset to another.
• If you are on an external call (HS1), you can forward the call to
another handset (HS2) by pressing and holding INT. HS1 will show
FORWARD TO and you should input the number of the desired
handset.
• HS2 will show INCOMING CALL and start ringing
• Press on the HS2 to answer.
If the forwarded call is not answered within 30 seconds, the external
call will be returned to HS1 and the display will show CALL BACK,
and ring for 30 seconds. If the returned call is not answered within 30
seconds, the external call will end automatically.
INTERCOM ENDED
UNABLE TO CALL
TRY AGAIN
FORWARD TO:
CALL BACK
Call transfer
• While on an external call, a handset (HS1) can transfer the call to another system handset (HS2)
by pressing INT. The external call is put on hold automatically.
• Select the handset number to be transferred (1-4).
• HS1 will call and show CALLING HANDSET 2
• HS2 can pick up the transferred call will ring and the screen will show HANDSET 1 IS CALLING.