Filter
Top Products
63
Appendix
Expand your telephone system
The handsets and headset provided with your telephone system are already
registered. Each handset is assigned a number that displays on the handset.
Additional handsets registered to the telephone system are assigned in
sequential order. For instance, if the telephone system already has
HANDSET 1 and HANDSET 2, the new registered handset is assigned
HANDSET 3. This telephone system accommodates up to ve handsets, or
four handsets and one headset.
Add and register a handset (optional)
You can add new handsets (LS6305, purchased separately) to your telephone
system. Each handset must be registered with the telephone base before
use. When rst purchased, each handset displays 1.Press FIND HS on base
4sec and 2.Then press # on handset alternately. You may need to charge
the handset before registering it to the telephone base. For more details on
battery charging, see page 6.
To register a handset:
Place the non-registered handset in the telephone base or charger. If
1.Press FIND HS on base 4sec and 2.Then press # on handset do not
appear alternately on the handset screen after a few seconds, remove the
handset and place it in the telephone base or charger again.
On the telephone base, press and hold /FIND HANDSET
for about four seconds until the red IN USE light on the
telephone base turns on.
Remove the handset from the telephone base or
charger and then press # (pound key). It displays
Registering...Please wait. It takes about 60 seconds
to complete the registration. The handset displays
HANDSET X Registered and you hear a beep when
the registration process completes.
If the registration fails, the handset displays Registration
failed for a few seconds, then 1.Press FIND HS on base
4sec and 2.Then press # on handset alternately. To reset
the handset, remove it from the telephone base or charger
and place it back in. Try the registration process again.
1.
2.
3.
You cannot register a handset if any other system handset or headset is
in use.