Filter
Top Products
Telephone settings
22
CID time synchronization
This feature allows the time and date to be set by incoming
caller ID information. The default setting is On.
Press MENU/SELECT when the handset is not in use.
Press / VOL or VOL/CID to highlight
>
Settings, then
press MENU/SELECT.
Press / VOL or VOL/CID to highlight
>
Set date/time,
then press MENU/SELECT.
Press / VOL or VOL/CID to highlight
>
CID time sync,
then press MENU/SELECT.
Press / VOL or VOL/CID to choose
>
On or
>
Off, then
press MENU/SELECT to conrm your selection. You
hear a conrmation tone.
Home area code
If you dial your local calls using only seven digits (area code not required), you
can program your home area code so that when you receive a call within your
local area, the telephone number is automatically stored without the area code
in the call log.
Press MENU/SELECT when the handset is not in use.
Press / VOL or VOL/CID to highlight
>
Settings, then
press MENU/SELECT.
Press / VOL or VOL/CID to highlight
>
Home area code, then press MENU/SELECT.
Use the dialing keys to enter the desired home
area code.
Press MUTE/REMOVE or OFF/CLEAR to delete a digit.
Press and hold MUTE/REMOVE to delete the
entire entry.
5. Press MENU/SELECT to conrm your selection. You
hear a conrmation tone.
1.
2.
3.
4.
5.
1.
2.
3.
4.
•
•
>Set date/time
Home area code
CID TIME SYNC
>On
Date & time
>CID time sync
If, in the future, your telephone service provider requires you to dial the area
code when making a local call, or, if you move to a location that requires it,
delete the home area code you have already programmed, following the steps
above. After you have deleted the home area code, _ _ _ appears.
HOME AREA CODE
___
>Home area code
Dial mode