Filter
Top Products
Telephone operation
Intercom
Use the intercom feature for conversation between two
system handsets.
When the handset is in idle mode, press MENU/SELECT
to enter the main menu.
Press / VOL or VOL/CID to highlight
>
Intercom, then
press MENU/SELECT.
If you have a two-handset system, your handset
screen shows Calling other handset.
If you have more than two handsets, your screen
shows INTERCOM TO:. Use the dialing keys to enter
the destination handset number. Your handset screen
shows Calling handset X.
The destination handset rings and its screen shows Other handset is
calling or Handset X is calling.
3. To answer the intercom call, press /FLASH, or any of the dialing
keys (0-9, #, TONE ) on the destination handset. Both handsets now
show Intercom.
To turn off the microphone during an intercom call, press MUTE/REMOVE
on the originating or destination handset. The handset screen shows
Muted for a few seconds and
MUTE
appears until the mute function is
turned off. Press MUTE/REMOVE again to resume the conversation.
To end the intercom call, press OFF/CLEAR or place the handset in the
telephone base or charger. Both screens show Intercom ended.
Answer an incoming call during an intercom call
If you receive an incoming outside call during an intercom call, there will be
an alert tone.
To answer the call, press /FLASH. The intercom call ends automatically.
To end the intercom call without answering the incoming call, press
OFF/CLEAR. The telephone continues to ring.
1.
2.
•
•
4.
5.
•
•
INTERCOM TO:
>Intercom
Ringers
You can cancel the intercom call before it is answered by pressing OFF/CLEAR
on your originating handset.
If the destination handset does not answer the intercom call within 100
seconds, is in the directory or call log, or is out of range, your originating
handset screen shows Unable to call. Try again and returns to idle mode.
You can use a maximum of ve handsets at a time. When two handsets are
used on an intercom call, use three other system handsets for an outside call.
•
•
•
25