Filter
Top Products
Telephone settings
Key tone
You can turn the key tone on or off.
Press MENU/SELECT when the handset is not in use.
Press / VOL or VOL/CID to highlight
>
Settings, then
press MENU/SELECT.
Press / VOL or VOL/CID to highlight
>
Key tone, then
press MENU/SELECT.
Press / VOL or VOL/CID to choose
>
On or
>
Off.
Press MENU/SELECT to conrm your selection. You
hear a conrmation tone.
Set date/time
The answering system announces the date and time of each message prior
to playing it. Before using the answering system, set the date and time as
follows. If you subscribe to caller ID service, the day, month and time are set
automatically with each incoming call. However, the year must be correct so
that the day of the week can be calculated from the caller ID information.
You can also turn off the date and time settings of the caller ID service and
use your own settings for each incoming call (see CID time synchronization
on page 14).
Press MENU/SELECT when the handset is not in use.
Press / VOL or VOL/CID to highlight
>
Settings, then
press MENU/SELECT.
Press / VOL or VOL/CID to highlight
>
Set date/time,
then press MENU/SELECT.
Press MENU/SELECT to highlight
>
Date & time.
Press the dialing keys (0-9) to enter a two-digit number
or press / VOL or VOL/CID until the screen displays
the correct month, day and year. Press MENU/SELECT
to advance to time setting.
Repeat step 5 until the time is set.
Press / VOL or
VOL/CID to choose AM or PM. Press MENU/SELECT
when nished. You hear a conrmation tone.
1.
2.
3.
4.
5.
1.
2.
3.
4.
5.
6.
>Key tone
Set date/time
KEY TONE
>On
>Set date/time
Home area code
SET DATE
12/25/09
SET TIME
10:45 AM
If the date and time are not set when a message is
recorded, the system announces, “Time and date not set,”
before each message plays.
>Date & time
CID time sync
13