Filter
Top Products
www.vtechphones.com
9
GETTING STARTED
Getting Started
Installation
Set Handset Date and Time
If you subscribe to caller ID service, the date and time will be set automatically with the first incoming
call. If you do not have caller ID service, you can set the date and time manually:
• Press PROG
, then press
or
until DATE/TIME is displayed. Press SELECT.
• The month is flashing. Press
or
until the screen displays the correct month. Press SELECT.
• The day is flashing. Press
or
until the screen displays the correct day. Press SELECT.
• The hour is flashing. Press
or
until the screen displays the correct hour. Press SELECT.
• The minute is flashing. Press
or
until the screen displays the correct minute. Press
SELECT
.
• AM or PM is flashing. Press
or
to choose between AM or PM. Press SELECT
Handset Ringer Style/Battery Save
You can select from four different handset ringer styles, or turn the ringer off and extend the
battery life.
1. With the handset in idle (off)
mode, press PROG.
2. Press
or
until the screen displays RINGER: and current setting.
3. Press SELECT. The current setting blinks, and you will hear a sample of the ring.
4. Press
or
to select RINGER: 1, 2, 3, 4 or OFF. You will hear a sample of each ring tone.
5. Press SELECT to choose the displayed ringer setting.
• In the event of a
power outage, or
if your phone’s
power cord is
unplugged, the
time setting will be
lost.