Filter
Top Products
24
Answering System Operation
Answering System Operation
NOTE: Exit feature setup at any time by pressing any MAILBOX button.
SYSTEM ANNOUNCES:
"Remote access code. To
change the setting press
CHANGE."
50*
"Message alert. To change the
setting press CHANGE."
Off*
On
"Announcement only, record
no messages. To change the
setting press CHANGE."
Off*
On
"Base ringer. To change the
setting press CHANGE."
On*
Off
"Number of rings. To change
the setting press CHANGE."
2
4*
6
Toll saver
(Default setting indicated by *)
DESCRIPTION/DIRECTIONS:
Set the remote access code you will
use to access features and functions
of the answering system from a touch
tone phone. Choose a two digit
number from 40 to 99.
NOTE: Pressing and holding the
CHANGE button will advance the re-
mote access code by increments of
10.
When message alert is turned on, the
base beeps once every 10 seconds
when new messages have been
received.
When you turn announcement only
on, callers hear your announcement
but cannot leave a message.
Turn the base ringer on or off.
Choose how many times the phone
will ring before the system answers.
With toll saver active, the system an-
swers after two rings when you have
new messages and after four rings
when you have no new messages.
FEATURE SUMMARY