Filter
Top Products
8
Registration
Registering the i 5807 Handset for the first time
After charging, the screen on the Handset will display:
If your Base Unit is model number i 5866:
1) Find the Base ID Code on the underside of the
Base Unit.
2) Enter the 15-digit Base ID Code into the Handset. If you make a mis
take, press the left NavKey to backspace or press the right softkey
to erase a character.
3) Press OK to complete the registration process.
If your Base Unit is model number i 5853 or i 5867, find the BASE ID Code (Base
must be OFF) and register the Handset by:
1) At the Base, press MENU.
2) Scroll down to DISPLAY BASE-ID, then press OK.
3) Enter the 15-digit Base ID Code into the Handset. If you make a
mistake, move the joystick to the left (
) to backpace or press
the right softkey
to erase a character.
4) Press OK to complete the registration process.
NOTE: If the Handset, after charging, says “Searching for Base...”, press the
NEW soft key. “Enter Base ID” will now be displayed. Follow the steps above.
Wait approximately 15-60 seconds. You will hear confirmation beeps from the
Base and Handset. The newly registered Handset will now be assigned the
lowest extension number not previously assigned to a different system Hand-
set (1 - 6).
If you do not enter the correct digit sequence, you will see Invalid Base ID! and
hear an
error tone. Press the left NavKey to backspace or press the right
softkey
to erase a character, and carefully re-enter the Base ID Code
following the above directions.
NOTE: The 15-digit BASE ID Code may contain numbers and characters,
such as *. Make sure you carefully enter all 15 digits.
Register
Getting Started