Filter
Top Products
15
Bluetooth
Base name:
VTech DS6321
PIN:0000
Cellular setup
completed
Device
connected
Pair a cell phone (continued)
Enter the PIN of the telephone base (the default
PIN is 0000) into your cell phone to continue the
pairing process.
When a device is successfully connected, the handset
displays Paired with cellular and then Cellular setup
completed Device connected. The corresponding
status icon ( 1 or 2) displays. The corresponding
device light on the telephone base (DEVICE1 or
DEVICE2) turns on.
When you already have two devices on the active
devices list, the handset shows Maximum of 2
devices can be connected. You are prompted to
replace an existing device on the active devices list
(page 21).
Auto connection
When a device is successfully paired with the telephone base but not
connected, the handset displays Cellular setup
completed Device not connected and then Auto-
connect function enabled Press SELECT.
You can press MENU/SELECT to exit. You can connect a
device manually (page 20).
8.
9.
•
The pairing process may take up to one minute. If the pairing process fails,
try again.
If you put the handset back in the telephone base or charger while pairing,
the process discontinues and the handset returns to idle mode.
•
•
Cellular setup
completed
Device not
connected
Auto-connect
function
enabled
Press SELECT