VTech DS3111-4 Cordless Telephone User Manual


 
www.vtechphones.com
6
Installation
Adding a new handset
Your telephone can accomodate up to ve cordless handsets. You can add new
handsets (DS3101, purchased separately) to the DS3111-2/TM3111-2/DS3111-
3/DS3111-4 at any time, but each handset must be registered with the telephone
base before use.
The DS3111-2/TM3111-2/DS3111-3/DS3111-4 comes with two/three/four registered
handsets (named HANDSET 1, 2, 3 and 4). Additional handsets will be assigned
numbers in the order they are registered (HANDSET 3, 4 and 5). You can register
a maximum of ve handsets.
Before using a new DS3101 handset, you must register it with the telephone base.
Each handset must be registered separately.
To register a handset to your telephone base
When rst purchased, all optional accessory handsets show
NOT REGISTRED on the screen. The handset may need to
be charged for at least ve minutes before registering to the
telephone base. To register a handset:
Place the unregistered handset in the telephone base or
charger. If PRESS FIND HNDST 4 SEC ON BASE does
not appear on the handset screen after a few seconds,
1.
• If the registration
is not successful,
the display
will show NOT
REGISTERED. To
reset the handset,
remove the
handset from the
telephone base or
charger and place
it back in. Try
the registration
process again.
• You cannot
register a handset
if any system
handset is in use.
NOT REGISTERED
PRESS FIND HNDST
4 SEC ON BASE