VTech dect 6.0 Answering Machine User Manual


 
7
Getting started
Wall mount to tabletop installation
If the telephone line cord and power adapter cord are bundled, untie them rst.
Unplug the telephone line cord (or the DSL lter) from the telephone wall jack.
Unplug the power adapter from the electrical outlet. Slide the wall mount bracket up
and remove it from the wall mount plate.
1.
2.
Tabletop position
Wall mount position
Push to release the wall mount bracket from the telephone base. Swivel it upwards
as the arrows indicated below. Then press it onto the telephone base until it clicks
into place.
3.
See Telephone base and charger installation on page 2.4.