Filter
Top Products
31
and (2) this device must accept any
interference received, including
interference that may cause undesired
operation. Privacy of communications
may not be ensured when using this
telephone.
To ensure safety of users, the FCC
has established criteria for the amount
of radio frequency energy that can be
safely absorbed by a user or bystander
according to the intended usage of the
product. This product has been tested
and found to comply with the FCC
criteria. The handset may be safely
held against the ear of the user. The
telephone base shall be installed and
used such that parts of the user’s body
other than the hands are maintained at
a distance of approximately 20 cm
(8 inches) or more.
This Class B digital apparatus complies
with Canadian requirement:
CAN ICES-3 (B)/NMB-3(B)
FCC Part 68 and ACTA
This equipment complies with
Part 68 of the FCC rules and with
technical requirements adopted by the
Administrative Council for Terminal
Attachments (ACTA). The label on
the back or bottom of this equipment
contains, among other things, a
product identifier in the format US:
AAAEQ##TXXXX. This identifier must
be provided to your telephone service
provider upon request.
The plug and jack used to connect this
equipment to premises wiring and the
telephone network must comply with
applicable Part 68 rules and technical
requirements adopted by ACTA. A
compliant telephone cord and modular
plug is provided with this product. It is
designed to be connected to a compatible
modular jack that is also compliant. An
RJ11 jack should normally be used for
connecting to a single line and an RJ14
jack for two lines. See the installation
instructions in the user’s manual.
The Ringer Equivalence Number (REN)
is used to determine how many devices
you may connect to your telephone
line and still have them ring when you
are called. The REN for this product is
encoded as the 6th and 7th characters
following the US: in the product identifier
(e.g., if ## is 03, the REN is 0.3). In most,
but not all areas, the sum of all RENs
should be five (5.0) or less. For more
information, contact your telephone
service provider.
This equipment may not be used with
Party Lines. If you have specially wired
alarm dialing equipment connected
to your telephone line, ensure the
connection of this equipment does not
disable your alarm equipment. If you
have questions about what will disable
alarm equipment, consult your telephone
service provider or a qualified installer.
If this equipment is malfunctioning, it
must be unplugged from the modular jack
until the problem has been corrected.
Repairs to this telephone equipment can
only be made by the manufacturer or its
authorized agents. For repair procedures,
follow the instructions outlined under the
Limited warranty.
If this equipment is causing harm to
the telephone network, the telephone
service provider may temporarily
discontinue your telephone service. The
telephone service provider is required
to notify you before interrupting service.
If advance notice is not practical, you
will be notified as soon as possible. You
will be given the opportunity to correct
the problem and the telephone service
provider is required to inform you of
your right to file a complaint with the
FCC. Your telephone service provider
may make changes in its facilities,
equipment, operation, or procedures
that could affect the proper functioning