22
Press or to highlight Ringer
tone, and then press SELECT.
Press or to sample each ringer
tone.
Press SELECT to save your
selection. Then the handset returns
to the previous menu. You hear a
confirmation tone.
NOTE
If you turn off the ringer volume, you will not
hear ringer tone samples.
Handset ringer volume
You can set the ringer volume or turn
the ringer off on each handset. When
the ringer is off, appears on the
screen.
Press MENU when the handset is not
in use.
Press or to highlight Ringers,
and then press SELECT.
Press or to select Ringer
volume, and then press SELECT.
Press or to sample each volume
level.
Press SELECT to save your
selection. Then the handset returns
to the previous menu. You hear a
confirmation tone.
NOTE
The ringer volume also determines the
ringer volume for intercom calls. If the ringer
volume is set to off, that handset is silenced
for all incoming calls except paging tone.
Temporary ringer silencing
When the telephone is ringing, you can
temporarily silence the ringer of the
handset without disconnecting the call.
The next call rings normally at the preset
volume.
3.
4.
5.
1.
2.
3.
4.
5.
To silence the handset ringer:
Press OFF or MUTE on the handset
and it displays Ringer muted and .
NOTES
Each handset and the base ring when
there is an incoming call unless the ringer
volume of that device is turned off.
Quiet mode
You can turn on the quiet mode for a
period of time (1-12 hours). During this
period, all tones (except paging tone)
are muted.
Press and hold ) when the
handset is not in use.
The handset displays Quiet: _ _
hours. Use the dialing keys (0-9) to
enter the desired duration (1-12).
Press SELECT to save. You hear a
confirmation tone.
The handset displays Quiet mode on
and .
To turn off the quiet mode:
Press and hold when the handset
is not in use. The handset displays Quiet
mode off briefly and then returns to idle.
NOTE
When you change the settings of the ringer
tone or ringer volume, you can still hear the
samples even if the quiet mode is on.
•
•
1.
2.
3.
•