Filter
Top Products
8
Speed dial
You can copy up to 10 directory entries into the speed dial locations so that
you can dial these numbers using fewer keys than usual.
To store a speed dial entry:
Press MENU/SELECT twice when the handset is not in use.
Scroll to >SPEED DIAL, then press MENU/SELECT.
Scroll to a desired speed dial location, then press MENU/SELECT.
Scroll to a desired directory entry, then press MENU/SELECT to save.
To dial a speed dial entry:
Press and hold a dialing key (0 through 9) to display the desired speed
dial entry when the handset is not in use.
Press /FLASH or to dial the displayed telephone number.
To delete a speed dial entry:
When the desired entry displays, press MUTE/DELETE. <EMPTY> appears.
Caller ID
This product supports caller ID services provided by most telephone service
providers. Depending on your service subscription, you may see the caller’s
name, number, date and time of calls that are sent by your telephone
service provider after the first or second ring.
Call log
The call log stores up to 50 entries. If you answer a call before the caller
information appears, it will not be saved in the call log.
The handset displays XX MISSED CALLS when there are calls that
have not been reviewed in the call log.
If you want to erase the missed call indicator, press and hold
OFF/CANCEL on the idle handset.
To review and dial a number in the call log:
Press CID when the handset is not in use.
Scroll to browse through the call log. When the desired entry appears:
Press # (pound key) repeatedly to show different dialing options.
Press 1 repeatedly if you need to add or remove 1 in front of the
telephone number.
Press /FLASH to dial the displayed number.
To save a call log entry to the directory:
When the desired call log entry displays, press MENU/SELECT.
When the screen displays EDIT NUMBER, use the dialing keys to
modify the number if necessary.
Press MENU/SELECT.
When the screen displays EDIT NAME, use the dialing keys to modify
the name if necessary.
Press MENU/SELECT to save.
To delete the call log entries:
Delete one entry: When the desired call log entry displays, press
MUTE/DELETE.
Delete all entries: Press MENU/SELECT when the handset is not in use.
Scroll to >CALL LOG and then press MENU/SELECT. Scroll to
>DEL ALL CALLS and then press MENU/SELECT twice.
1.
2.
3.
4.
1.
2.
•
•
1.
2.
•
•
3.
1.
2.
3.
4.
5.
•
•
Add and register a handset
The handsets provided with your telephone system are already registered.
Each handset is assigned a number that show on the handset display.
Additional handsets registered to the telephone system are assigned
numbers in sequential order. This telephone system accommodates up to
five handsets.
You can add new handsets (CS6409, purchased separately) to your
telephone system. Each handset must be registered with the telephone
base before use. When first purchased and properly charged, each
expansion handset shows 1.PRESS FIND HS ON BASE 4 SEC and
2.THEN PRESS # ON HANDSET alternately. You need to charge the
handset before registering it to the telephone base.
To register a handset:
Place the unregistered handset in the telephone base or charger. If
1.PRESS FIND HS ON BASE 4 SEC and
2.THEN PRESS # ON HANDSET do not appear alternately on the
handset after a few seconds, remove the handset and place it in the
telephone base or charger again.
1.