Filter
Top Products
46
Appendix
Expand your telephone system
The handsets provided with your telephone system are already registered.
Each handset is assigned a number that displays on the handset. Additional
handsets registered to the telephone system are assigned in sequential
order. For instance, if the telephone system already has HANDSET 1 and
HANDSET 2, the new registered handset is assigned HANDSET 3. This
telephone system accommodates up to ve handsets.
Add and register a handset (optional)
You can add new handsets (CS6309, purchased separately) to your
telephone system. Each handset must be registered with the telephone
base before use. When rst purchased, each handset shows 1.PRESS
FIND HS ON BASE 4 SEC and 2.THEN PRESS # ON HANDSET
alternately. You may need to charge the handset before registering to the
telephone base. For more details on battery charging, see page 4.
To register a handset:
Place the unregistered handset in the telephone base or charger. If
1.PRESS FIND HS ON BASE 4 SEC and 2.THEN PRESS # ON
HANDSET
do not appear alternately on the handset screen after a
few seconds, remove the handset and place it in the telephone base or
charger again.
On the telephone base, press and hold
/FIND HANDSET for about four seconds (until the red
IN USE light on the telephone base turns on) and then
release the button.
Remove the handset from the telephone base
or charger. Press # and the handset displays
REGISTERING...PLEASE WAIT. It takes about 10
seconds to complete the registration. The handset shows
HANDSET REGISTERED and you hear a beep when the
registration completes.
1.
2.
3.
If the registration fails, the handset shows 1.PRESS
FIND HS ON BASE 4 SEC and 2.THEN PRESS # ON
HANDSET alternately. To reset the handset, remove the
handset from the telephone base and place it back in. Try
the registration process again.
You cannot register a handset if any other system handset
is in use.
•
•