23
Telephone operation
Share an outside call
You can call another system handset to join an outside call.
During a call, press INT. The outside call is put on hold.
If you have a two-handset system, your handset
screen shows CALLING HANDSET X.
If you have more than two handsets, your screen
shows
INTERCOM TO:.
Use the dialing keys to select
the destination handset. Your screen then shows
CALLING HANDSET X.
The destination handset rings and its screen shows
HANDSET X IS CALLING.
2. To answer the call on the destination handset, press
/FLASH, , INT or any of the dialing keys (0-9, #,
TONE ) . The outside call is still on hold and both
handsets now show INTERCOM. You can now have a
private conversation between the system handsets.
3. From this intercom call, you have the following options:
You can let the destination handset join you on the outside call in a
three-way conversation. Press and hold INT on your originating handset.
You can transfer the call. Press OFF/CLEAR, or place your handset
back in the telephone base or charger. Your screen shows CALL
TRANSFERRED. The destination handset is automatically connected to
the outside call.
You can alternate between the outside call (OUTSIDE CALL appears on
the screen) and the intercom call (INTERCOM appears on the screen).
Press INT repeatedly on your originating handset.
The other person can leave the intercom call by pressing OFF/CLEAR,
or placing the destination handset back in the telephone base or
charger. The outside call continues with the original system handset.
1.
•
•
•
•
•
•
If you want to cancel an intercom call and reconnect
to the outside call before the destination handset
answers, press /FLASH, OFF/CLEAR or INT on your
originating handset.
If the destination handset does not answer the intercom call within 100
seconds, is in the directory or call log, or is out of range, your originating
handset screen shows
UNABLE TO CALL. TRY AGAIN and reconnects to
the outside call automatically.
•
•
INTERCOM TO:
CALLING
HANDSET X
HANDSET X
IS CALLING
INTERCOM