Filter
Top Products
9
Telephone settings
Key tone
You can turn the key tone on or off.
Press MENU/SELECT when the handset is not in use.
Press CID or until the screen displays Settings,
then press MENU/SELECT.
Press CID or until the screen displays Key tone,
then press MENU/SELECT.
Press CID or to choose On or Off, then press
MENU/SELECT to conrm your selection. You hear a
conrmation tone.
Set date and time
The answering system announces the date and time of each message prior
to playing it. Before using the answering system, set the date and time as
follows. If you subscribe to caller ID service, the day, month and time are set
automatically with each incoming call. However, the year must be correct so
that the day of the week can be calculated from the caller ID information.
To change the setting:
Press MENU/SELECT when the handset is not in use.
Press CID or until the screen displays Settings,
then press MENU/SELECT.
Press CID or until the screen displays
Set date/time, then press MENU/SELECT.
When the month is ashing, press CID or until
the screen displays the correct month and then press
MENU/SELECT; or, press the dialing keys (0-9) to enter
the current month (for example, if the month is March,
you must enter 03).
Repeat step 4 to set the correct date and year and then
press MENU/SELECT to advance to time setting.
When the hour is ashing, press CID or until the
screen displays the correct hour and then press
MENU/SELECT; or, press the dialing keys (0-9) to enter
the current hour (for example, if the time is two o’clock,
you must enter 02).
Repeat step 6 to set the correct minute. When AM or PM
is ashing, press CID or to select AM or PM. Press
MENU/SELECT to save your settings. You hear a conrmation tone.
1.
2.
3.
4.
1.
2.
3.
4.
5.
6.
7.
If the date and time are not set when a message is recorded, the system
announces, “Time and date not set,” before each message plays.
When there is a power failure or after battery replacement, the date and time
need to be reset.
•
•
Settings
Key tone
On
Settings
Set date/time
Date: 03/25/10
Time: 02:35 PM