Filter
Top Products
12
Telephone operation
Temporary ringer silencing
When the telephone is ringing, you can temporarily silence the ringer of the
handset without disconnecting the call. The next call rings normally at the
preset volume.
To silence the handset ringer:
Press OFF/CANCEL or MUTE/DELETE and then
Ringer muted displays.
Temporary tone dialing
If you have pulse (rotary) service only, you can switch from pulse to tone
dialing temporarily during a call. This is useful if you need to send touch-
tone signals to access your telephone banking or long distance services.
During a call, press TONE .
Use the dialing keys to enter the number. The telephone sends
touch-tone signals.
The telephone automatically returns to pulse dialing mode after you end
the call.
Find handset
Use this feature to nd all system handsets.
To start paging:
Press /FIND HANDSET on the telephone
base once and then release when the
telephone is not in use.
All system handsets ring and ash
**
Paging
**
for 60 seconds.
To end paging:
Press /FIND HANDSET on the telephone base once and then release.
-OR-
Press /FLASH or any of the dialing keys (0-9, TONE or #) on the
handset to stop the paging tone.
Multiple handset use (for CS6114-2 only)
You can use both handsets at a time on an outside call.
To share an outside call:
When a handset is already on a call and you would like to join the call,
press /FLASH on the other handset to join the call.
To end the call, press OFF/CANCEL or place the handset in the telephone
base or charger. The call continues until all handsets hang up.
•
1.
2.
3.
1.
2.
•
•
•
•
Ringer muted
10:15 PM
12/25
Do not press and hold /FIND HANDSET for more than four seconds.
It may lead to handset deregistration. If Not registered displays on the
handset, refer to Troubleshooting on page 26 to register the handset to
the telephone base.