Filter
Top Products
www.vtechphones.com
42
Answering system
If you pause more
than four seconds
after each
remote command
completed,
the system
will announce
the help menu
options. If no
remote command
is entered within
15 seconds, the
remote access
call will be
automatically
disconnected.
When the
answering system
is turned off,
the telephone
will answer after
10 rings, and
announce “Please
enter your remote
access code.”
•
•
Remote access
A two-digit security code is required to access the system remotely from any
touch tone telephone that does not share the same line with your answering
system. The factory preset code is 19; see page 34 to change it.
Dial your telephone number from any touch tone telephone.
When the system answers and announces the greeting, enter the two-digit
security code. If you have new messages, the system will play them (new
messages rst) automatically.
You may also enter one of the following remote commands.
Hang up or press 8 to end the call.
1.
2.
3.
4.
Command Function
1 Play all messages.
2 Play only new messages.
3 Delete the current message (during playback).
33 Delete all old messages.
4 Repeat the current message (during playback).
5 Stop.
*5 Hear a list of remote commands.
6 Skip to the next message (during playback).
*7 Record a new announcement.
8 End the call.
0 Turn the answering system on or off.