Filter
Top Products
www.vtechphones.com
21
Basic operation
Telephone operation
Telephone operation
Speed dial
Your telephone can store up to nine telephone numbers with names (up to 14
characters and 24 digits in each location) in the speed dial memory locations
you assign in each handset.
Store a speed dial entry
Press PROG when the handset is not in use and then press or until the
screen displays SPEED DIAL.
Press SELECT. The screen displays ENTER 1-9.
Press a key (1 through 9) to assign the speed dial location where this number
will be stored. The screen displays ENTER NAME.
Use the dial pad keys to enter the name (see the
Character chart on page
17) and then press SELECT or PROG .
Press to move the cursor to the left or to the right.
Press CHAN/REMOVE to erase a character.
The screen displays ENTER NUMBER.
Use the dial pad keys to enter the telephone number, and then press
SELECT
or PROG.
Press to move the cursor to the left or to the right.
Press CHAN/REMOVE to erase a digit.
Press REDIAL/PAUSE to insert a dialing pause (P will be displayed).
The screen displays DISTINCT RING? and the current setting.
1.
2.
3.
4.
•
•
5.
6.
•
•
•
7.
The entries stored
in the speed
dial memory will
be numbered
01 through 09
and share the
memory in the
directory.
Press OFF at
any time to exit
the Speed dial
menu.
If the location is
not empty, the
new entry will
replace the old
entry and the
old entry will
be moved to a
directory location.
•
•
•