Filter
Top Products
www.vtechphones.com
4
Getting started
Mounting bracket installation
Your telephone base comes with the mounting
bracket installed, ready for desktop use. You may
also mount your telephone onto a standard telephone
wall plate.
Wall mounting bracket installation:
To prepare the telephone base for wall mounting,
you will need to remove the bracket if it is currently
attached for desktop use. Press on the tabs located
on the legs of the bracket to loosen, then lift the
bracket up and away from the telephone base.
First, insert the lower portion tabs of the mounting
bracket into the lower grooves in the telephone
base, then snap the upper portion tabs of the
mounting bracket into place.
Mount the telephone base on the wall by positioning
it so the mounting studs will t into the holes on the
telephone base and mounting bracket. Slide the
telephone base down on the mounting studs until
it locks into place.
To remove the bracket, press both upper portion
tabs rmly inward and pull the bracket downward
until it releases from the grooves.
1.
2.
3.
AC 7.5V
Mounting bracket in wall
mount orientation
upper grooves
upper portion tabs
lower
portion
tabs
Mounting bracket
lower groove