Filter
Top Products
7
Getting started
Installation
To register your accessory handsets
Your phone comes with a handset which is already registered as
Handset 1. Your phone can operate up to four handsets, to order
additional handsets call the supplier.
1. After charging the battery, the screen will display:
2. On the base unit, press
MENU/SEL, then scroll to DISPLAY BASE
ID, press MENU/SEL.
3. Enter the 15 digit base unit ID code, if you make a mistake, press the
DELETE/MUTE key to backspace (delete characters), then enter
the correct information.
4. Press
MENU/SELECT to complete the registration process.
5. Once a valid base ID code has been entered, the display will go
blank for a second or two, and then show:
6. If the base accepts the new handset, after several seconds the new
handset will show:
Re-register existing handsets to a new base
1. Install your new base unit, the handset(s) will display SEARCHING…,
press and hold the MENU/SELECT button for two seconds.
2. The handset will display:
3. Follow steps 2 through 6 in
To register your accessory handsets,
above.
ENTER BASE ID
###############
SEARCHING...
HANDSET 2
ENTER BASE ID
###############
SEARCHING...
• The 15-digit base
ID code may
contain numbers
and characters,
including 0
through 9 and *.
Make sure you
enter all 15 digits.
•
If you do not
enter the correct
digit sequence,
you will hear an
error tone. Press
DELETE/MUTE
key to backspace
to erase a
character(s) and
carefully re-enter
the base ID code.