PHONELED
-
Glows steadily when Handset is in use.
Flashes slowly when a call is on HOLD.
1
Flashes rapidly when Handset is in Pro-
gram (PRG) mode.
Flashes in cadence with an incoming
ring.
INT.COM LED
.
'
Glows steadily when the INT.COM key is
pressed on the Handset
LOW BATT/MUTE LED.
.
'
Flashes to signify that the Handset bat-
tery pack needs recharging.
Glows steadily when the MUTE key is
pressed during a call.
F
E
A
T'U'R
E
S
PHONE (FLASH) Key
CHANNEL (CHAN) Key
Press this key to get a dial tone or an-
swer an incoming call.
During a call, press PHONE to FLASH
the line. This feature is used in conjunc-
tion with services such as Call Waiting.
-
-
-
-
-
-
-
-
INT.COM Key
Press this key to initiate two-way, inter-
nal communication between the Handset
and Base Unit. The Base Unit will emit
two beeps, and will then automatically
enter lntercom mode. The party at the
Base Unit does not need to press any
key to activate this feature, when it is ini-
tiated fromthe Handset.
OFF
Key
-~-
---
Press this key to end a call, exit from In-
tercom (INT.COM) mode or Program
(PRG) mode.
HOLD Key
Press this key to temporarily suspend
conversation without terminating the call.
With a call on
HOLD,
you can:
lntercom the ~ase Unit
Transfer the call to the Base Unit
Return to the call by pressing PHONE.
NOTE:
If you have placed a call on HOLD and
want to hang up: Press PHONE to
return to the call, then press OFF, or
place the Handset in the Base Unit.
If you are experiencing noise or interfer-
ence during a call, press the CHAN key
to change to the next free channel.
NOTE: You may need to press CHAN
more than once to find an
interference-
free channel.
--
MUTE Key
Press this key to mute the Handset mi-
crophone during a conversation. You
will still be able to hear the other party,
but they cannot hear you.
Press MUTE again to resume two-way
conversation.
MEMORY (MEM) Key
Press this key to enter MEMORY DIAL-
ING mode.
The sequence for dialing a phone num-
ber stored in memory is: Press PHONE,
MEM, Memory Location
(0-9).
PROGRAMIPRIVACY (PRGIPRV) Key
With the Handset OFF, press this key to
store phone numbers into MEMORY, as
well as programming the Handset
RINGER.
See PROGRAMMING THE RINGER
TYPE, and TO STORE A NUMBER
INTO MEMORY, for details.
During a call, press
PRGIPRV to prevent
the Base Unit from joining the conversa-
tion.
When you hear a dial tone, press this
key to redial the last phone number
dialed on your 917ADX.
The phone number stored in REDIAL
can be placed in a MEMORY dial
location.
From the PULSE (Rotary) dialing mode,
press this key to switch to TEMPORARY
TONE dialing mode.
When the call is ended, the phone will
return to PULSE dialing mode.
VOLUME CONTROL
+s~~~~~'~~@.;
Located on the Left edge of the Handset.
Two Settings: H (High) and L (Low).
HEADSET JACK
(2.5
mm)
..y
rt~p,
'
'
Located on Right edge of the Handset.
Plug (optional) Headset into this jack for
hands-free operation.
See OPTIONAL HEADSET INSTALLA-
TION AND OPERATING INSTRUC-
TIONS for more information.
