Filter
Top Products
Changing Channels
In the unlikely event you notice
interference when using your handset,
press CHAN to switch to a clear
channel. Using this key to change
channels is only available when you
are on
acall. When the call is on HOLD
or if you are in STANDBY mode, the
CHAN
key is inactive.
PRESS
CHAN
IF
YOU
HEARD
NOISE IN A
CONVERSATION
Temporary,Tone
If
you have rotary (dial-pulse) telephone
service, (TONUPULSE switch is set to
PULSE), this featureallows you
toenter
special codes and tones to operate
answering machines, use electronic
banking services, calling cards, or other
special services.
First, dial the call normally.
Then
activate the Temporary Tone feature
by pressing TONE (the
key). You can
then press the numbers orsymbols you
need, and your phone will send the
proper signals.
TEMPORARY TONE
OPERATION
1.
DlAL YOUR CALL
eg.
@
@
......
2.
PRESS
@
3.
PRESS THE NUMBERS
or
SYMBOLS YOU
NEED
To end the call, press OFF or place the
handset back in the base. The phone
will automatically go backto rotary (dial-
pulse) service.
If you have touch-tone service, (TONE1
PULSE switch set to TONE), just enter
the codes normally. This feature is only
for rotary service telephone lines.
Programming the Ringer Type
The handset ringer is capable of four
different types of ringing tones. The
following sections detail how to change
the different tones and to turn off the
ringer on the handset.
To program, the handset must be OFF.
To select a different ringer type do the
following:
Press PR G
Press the
#
key.
*Press a key
1..4 to select a
ringer type.
Press OFF to exit.
Turning Off The Ringer
To turn off the ringer on the handset,
do the following:
Press PRG
Press the
#
key
Press
5
to turn off the ringer
Press OFF to exit
To turn ringer on again, see
Programming the Ringer Type.
PROGRAMMING THE
RINGER TYPE
1.PRESS
2.
PRESS
3.
SELECT RINGER TYPE
@@
4.
PRESS TO EXIT
TURNING OFF
THE RINGER
4. PRESS TO EXlT
Checking the Ringer
To check the ringer which is currently
programmed, do the following:
Press PRG
Press the
#
key
Press 0
Press OFF to exit
The phone will ring once to show the
ringer selected.
CHECKING THE
RINGER TYPE
1.PRESS
2.
PRESS
3.PRESS
@
4.
PRESS TO EXlT
Memory Dialing
The VTech
900i
can store up to
10
different phone numbers that you can
dial just by pressing MEM and one of
the number keys.
To Store a Number into Memory
The handset must be OFF.
1.
Press PRG
2.
Press the number of the memory
location you wish to store the
number in (0..9).
3.
Using the dial pad, dial the number
you want to store. The number can
be up to
16
digits long.
4.
Press MEM. That assigns the phone
number to the key you selected.
STORE NUMBER
INTO MEMORY
THE
HANDSET MUST
BE OFF
2.
PRESS
@
.....
@
3.
DlAL YOUR NUMBER
. . . . . . .
.
.