Filter
Top Products
www.vtechphones.com
2
Install handset battery
• Align the two holes in the plug with the socket pins according to the color-coded label in the
battery compartment, then snap the plug into place.
• Place the battery into the compartment.
• Position the battery compartment cover and slide it upwards until it clicks into place.
• Put the handset in the telephone base to charge the new battery for at least 16 hours. The battery
may have enough charge for short calls. For best performance, charge it for at least 16 hours.
You can keep the battery charged by returning the handset to the telephone base after each use.
When the battery power is fully depleted, a full recharge takes about 16 hours.
For further information on batteries, please see the
Battery section on page 29.
Installation
color-coded label
If the handset will
not be used for a
long period of time,
remove the battery
to prevent possible
leakage.
To purchase
replacement
batteries, visit our
website at www.
vtechphones.
com or call 1
(800) 595-9511. In
Canada, go to www.
vtechcanada.com
or dial 1 (800) 267-
7377.
•
•