Filter
Top Products
10
Getting Started
Wall Mounting
The Wall Mount bracket is designed for
use on standard Wall Mount plates only.
1. Line up the tabs on the wall mount
adapter with the holes on the bottom
of the base unit. Snap the wall
mount bracket firmly in place.
2. Plug the AC adapter into an electrical
outlet, and the DC connector to the
back of the base unit. If the handset
battery pack has not been charged
previously, place the handset in the
base unit cradle, and allow it to
charge for 12 hours.
3. Connect the telephone line cord to
the jack on the back of the base unit,
and the other end to the wall jack.
4. Mount the base unit on the wall.
Position the base unit so the
mounting studs will fit into the holes
on the wall mount bracket. Slide
base unit down on the mounting
studs until it locks into place.
2
3
1