Filter
Top Products
27
Cancel Call Waiting (Tone Block)
When you don’t want to be disturbed or interrupted during an important call,
you can temporarily deactivate Call Waiting. You can activate Cancel Call Waiting
before you place a call or at any point during the conversation. Cancel Call
Waiting works only for the length of one call. When you hang up, Call Waiting
returns automatically to your phone.
To cancel the Call Waiting tone before placing a call:
Ī
Lift the handset and listen for dial tone.
Ī
Press .
Ī
Listen for confirmation tone, followed by normal dial tone.
Ī
Dial the telephone number.
To cancel the Call Waiting tone during a call:
Ī
Press the switchhook (or the Tap/Flash/Recall/Link button, depending on your
telephone set).
Ī
Press (you will reconnect automatically to your call).
NOTE: In some areas you can only activate Cancel Call Waiting before placing a call.
0
7
*
0
7
*
26
Call Waiting
This valuable feature provides an audible tone while you are on the line that
alerts you of another incoming call. You then have the option to either place
the present call on hold to answer the incoming call or to disregard it. The
calling party will receive ringing tone instead of a busy tone. Use Call Waiting
to maximize line efficiency and improve customer service by ensuring prompt
responses to urgent inquiries.
After hearing the Call Waiting tone:
Ī
Either end your first call or tell the person to whom you are speaking that
you are going to put them on hold.
Ī
Press and release the switchhook (or the Tap/Flash/Recall/Link button,
depending on your telephone set) to put the first person on hold and answer
the second call in the GTD-5 switch.
Ī
Press and release the switchhook (or the Tap/Flash/Recall/Link button,
depending on your telephone set), listen for the flash tone, then dial
to put the first person on hold and answer the second call in the DMS 100,
DMS 10 and 5ESS switches (may also be required for GTD-5 switch).
Ī
To return to the first call and put the second call on hold, repeat bullet two or
three (depending on switch type). You can alternate between calls as often as
desired by repeating bullets two or three (depending on switch type).
NOTES:
1.) Call Waiting allows you to have two calls on your line at the same time
(one on hold and one to whom you are talking). A third caller will hear a
busy signal.
2.) Call Waiting cannot be assigned to lines in a Multi-Line Hunt group.
3.) Call Waiting overrides Call Forwarding – Busy Line/Don’t Answer.
4.) Call Forwarding overrides Dial Call Waiting.
5.) Series Hunting overrides Call Waiting, which should be assigned to the last
number of a Series Hunt group.
6.) A three-way conference cannot be made between an established call and
a Call Waiting call.
7.) If Call Waiting and Call Forwarding – Don’t Answer are active on the same
line and you choose to ignore the Call Waiting tone, the call will forward to
your Call Forwarding – Don’t Answer number.
1
0
*