Filter
Top Products
10
3) Make sure that the in use/ LED and LED (XS1415+1 only) illuminate. If the
LED does not illuminate, check to see that the AC adapter is plugged in and that
the handset makes good contact with the cradle’s charging contacts.
Note:
• Connect the AC adapter to a continuous power supply
• Place each cradle close to the AC outlet to avoid long extension
cords.
• Charge your handsets at least 15 - 20 hours before
plugging into the phone line.
4) Once the handset battery packs are fully charged, connect
the telephone cord to the TEL LINE jack and a telephone
outlet. If your telephone outlet isn't modular, contact your
telephone company for assistance.
Route the cord.Route the cord.
XS1415+1 OM.indd 10 21/5/08 10:35:10 AM