Uniden XS1210 Cordless Telephone User Manual


 
Included with Your Phone
Base Unit Handset AC adaptor
Rechargeable Battery Telephone Cord Wall Mount adaptor
This owner’s manual
Terminology
Throughout this manual, terms such as Standby and Talk Mode are used. Below is
the terminology explanation.
Talk Mode - The handset is off the base and the talk key has been pressed,
enabling a dial tone.
Standby Mode - The handset may be sitting in or off the base, but is NOT in use.
The talk key has not been pressed and there is no dial tone.
Installing the Phone
Do the following steps:
A. Choose the best location
B. Install the rechargeable battery pack into the handset
C. Connect the base unit and charge the handset
D. Mount the base unit on a wall
A. Choose the best location
When choosing a location for your new phone, here are some important guidelines
you should consider:
The location should be close to both a phone jack and a continuous power
outlet (one which is not connected to a switch).
The base and handset should be kept away from sources of electrical noise
such as motors and fluorescent lighting.
The base can be placed on a desk, tabletop, or mounted on a standard wall
plate. For better reception, place the base as high as possible.
The base should be placed in an open area for optimum range and reception.
Avoid noise sources such as a window
by a street with heavy traffic
Avoid heat sources, such as radiators,
air ducts, and sunlight
Choose a central location
Avoid other cordless telephones
Avoid personal computers
Avoid excessive moisture, extremely
low temperatures, dust, mechanical
vibration, or shock
Avoid microwave ovens
Avoid television sets and
other electronic equipment
[2]