Filter
Top Products
Selecting a Preset OGM
After you have recorded an outgoing message, you can set your Answering
System to play either a preset message or your outgoing message.
1. Press
ogm
.
Your recorded outgoing
message will begin to play.
2. While your recorded outgoing message is playing, press
ogm
again.
A tone will sound, and you hear the preset message “Hello. No one is available
to take your call, please leave your message after the tone” on the Base Unit
speaker. A second tone sounds after the preset message plays, and the
Answering System automatically returns to Standby.
Note: If the REC TIME/ANN/4/1 switch is set to Announce Only, then the
preset message “Hello. No one is available to take your call” is played.
3. To select your recorded
message again, press
ogm
.
The preset message will begin
to play on the Base Unit speaker.
4. While the preset message is playing, press
ogm
again.
A tone will sound, and your recorded message will play on the Base Unit
speaker. A second tone sounds after your message plays, and the Answering
System automatically returns to Standby.
50