Filter
Top Products
If the
talk/batt low
LED begins to flash, the phone is programmed to limit its
functions to save power. The table below describes what to do to return your
phone to normal operation.
DURING A CALL IN STANDBY MODE
Only the
A
button operates.
None of the buttons will operate.
The Handset beeps and the
talk/batt
low
LED flashes once every 3 seconds.
The Handset
talk/batt low
LED flashes
once every 3 seconds.
Complete your call as quickly as
possible.
You will not be able to make a call.
Return the Handset to the Base Unit for
charging.
Return the Handset to the Base Unit for
charging.
Note:
Allow 15 to 20 hours without any interruption for the Handset to fully recharge.
Setting the Pulse/Tone Switch
Be sure the
PULSE/TONE
switch is in the
TONE
position.
Note:
Most phone systems are Tone dialing. Check with your local phone company
if you are not sure whether your system is Tone or Pulse dialing.
26