Filter
Top Products
Battery use time (per charge)
From fully charged (15-20 hours charge time)
• Up to 7 hours continuous use
(up to 5 hours when the Clarity Booster is On)
• Up to 10 days when the handset is in the standby mode
(up to 15 hours in the DirectLink mode)
[ 3 ]
Recharge your handset on a regular basis by returning
the handset to the charger after each phone call.
Battery Information
Low battery alert
When the batteries are very low and need to be charged, the
phone is programmed to eliminate functions in order to save
power.
The batteries need to be charged when :
- The empty battery icon appears.
- ‘Low Battery’ appears in the display.
If the phone is in the standby mode, none of the keys
will operate. If you are on a call, complete your
conversation as quickly as possible, and return
the handset to the charging cradle.
• Use only the Uniden battery (BT-
446) supplied with your phone.
Replacement batteries are also
available through the nearest Uniden
dealer. (See page 1.)
• Recharge your handset on a regular
basis by returning the handset to the
charger after each phone call.
5
Place the handset in the charging cradle with
the keypad facing forward.
Cleaning the battery charging
contacts
To maintain a good charge, it is
important to clean the charging contacts
on the handset once a month.
Use a dry cloth or pencil eraser to clean.
Do not use paint thinner, benzene, alcohol, or other chemical
products. Doing so may discolor the surface of the telephone
and damage the finish.