Filter
Top Products
To AC outlet
AC adapter
(supplied)
To DC IN 9V
1
Press down on the battery cover
release and slide the cover down until it
comes off.
2
Plug the battery pack connector (red
& black wires) into the jack inside the
battery compartment. (The connector
notches fit into the grooves of the
jack only one-way.) Match the wire
colors to the polarity label in the
battery compartment, and push the
connector in until you hear a click.
3
Make sure you have a good
connection by slightly pulling on the
battery wires. If the connection is
secure, the battery jack will remain in
place.
4
Place the battery case cover back on
the handset by sliding it upwards until
it clicks into place.
Red
Wire
Black
Wire
Installing the Battery Pack
1
Connect the AC
adapter to the DC
IN 9V jack and to a
standard AC wall outlet.
2
Set the charger on a
desk or tabletop, and
place the handset in
the charger with the
keypad facing forward.
Connect the Charger
• Use only the supplied AC adapter. Do not use any
other AC adapter.
• Place the charger close to the AC outlet so that you
can unplug the AC adapter easily.
3
Make sure the charge LED illuminates. If the LED does not
illuminate, check to see that the AC adapter is plugged in
and that the handset makes good contact with the charger
charging contacts.
[ 2 ]