Filter
Top Products
GETTING STARTED
[ 11 ]
GETTING STARTED
BBaatttteerryy uussee ttiimmee ((ppeerr cchhaarrggee))
From fully charged
• 6 hours continuous use.
• 10 days when the handset is in the standby mode.
WWhheenn tthhee bbaatttteerryy cchhaarrggee bbeeccoommeess llooww
When the voltage of the battery pack in the handset is very
low and needs to be charged, the phone is programmed to
eliminate functions in order to save power. If the battery
charge becomes low, “
Low Battery“ appears on the LCD.
If during a call, the handset beeps. Complete your
conversation as quickly as possible and return the handset
to the base unit for charging.
CClleeaanniinngg tthhee cchhaarrggiinngg ccoonnttaaccttss
To maintain a good charge, it is important to
clean the battery contacts on the handset and
base unit with a dry cloth or a pencil eraser
about once a month.
DDoo nnoott uussee aannyy lliiqquuiiddss oorr ssoollvveennttss..
• Even when the battery
pack is not being used, it
will gradually discharge
over a long period of
time. For optimum
performance, be sure to
return the handset to the
base unit after each
telephone call.
• The previously dialed
number in the redial
memory is retained for
up to 2 minutes while
you replace the battery
pack.
• If you must replace the
battery pack during a
telephone call, complete
the replacement of the
battery pack within
30 seconds, and you
can return to the
original call.
The handset memory backup can hold numbers and names stored in the
memory minutes even if the battery pack is completely discharged.
TRU348 6/18/01 9:53 AM Page 11