Filter
Top Products
Programming a Channel into Memory
Before using the scanning feature, you have to program channels
into memory.
Select the channel to enter into memory
by pressing the
▲ or ▼ button.
Press the
MEM/FIPS button to store the
channel.
MEM appears on the display.
Deleting a Channel from Memory
Select the channel to delete from
memory by pressing the
▲ or ▼ button.
Press the
MEM/FIPS button.
MEM disappears from the display.
Scanning
To begin scanning the programmed
channels, press the
SCAN button. SCAN
and TRI appear on the display.
To stop scanning, press the
SCAN
button once more. SCAN and TRI dis-
appear from the display.
• Scanning starts from the lowest to highest channel and stops
when it finds an active channel. It remains on that channel until
the transmission ends, then resumes scanning after a 2 second
delay period.
• When in the scan mode, the unit automatically activates the
Triple Watch feature. To deactivate Triple Watch from the
scanning mode, press and hold the
16/9/TRI button for
2 seconds.
TRI disappears from the display.
2
1
2
1
2
1
18
UT01919ZC_0 (ENG) 5/8/07 1:27 PM Page 18