Uniden MHS350 Two-Way Radio User Manual


 
To store the FIPS code:
Press and hold the
MEM/FIPS key for
2 seconds.
The radio enters the registration mode.
Select the location number from 01 to 15
by pressing the
or button.
Press the
MEM/FIPS button.
Now enter the FIPS code.
Press the
or button to select the
number from 1 to 9. The number will be
entered when
MEM/FIPS is pressed, and
the blinking digit moves to the right. When
you enter the last digit, the confirmation screen appears.
USA, International and Canadian Channels
The MHS350 is initially set for USA
marine channels when you turn On
your radio.
To listen to international marine
channels, press the
UIC button once.
INT appears on the display.
To listen to Canadian marine channels,
press the
UIC button again.
CAN appears on the display.
The radio will keep the last mode setting
that was selected when turned back On.
For USA, International and Canadian
marine channels and functions, refer to
the tables starting on page 21.
4
3
2
1
4
3
2
1
17
UT01919ZC_0 (ENG) 5/8/07 1:27 PM Page 17