Filter
Top Products
[ 9 ]
GETTING STARTED
GETTING STARTED
SSttaannddaarrdd wwaallll ppllaattee mmoouunnttiinngg
This phone can be mounted on any standard wall plate.
1)Plug the AC adapter into the
DDCC IINN 99VV
jack.
2)Wrap the AC adapter cord inside the molded wiring
channel as shown.
3)Plug the AC adapter into a standard 120V AC wall outlet.
4)Place the handset on the base unit and charge for
12-15 hours.
5)Plug the telephone line cord into the
TTEELL LLIINNEE
jack. Wrap
the cord inside the molded wiring channel as shown.
6)Plug the telephone line cord into the telephone outlet.
Mounting the Base Unit on a Wall
DO NOT use an outlet
controlled by a wall
switch.
SSeettttiinngg tthhee hhaannddsseett rreettaaiinneerr cclliipp ffoorr wwaallll mmoouunnttiinngg
1)On the base unit, pull the handset retainer clip out of the
slot and rotate it clockwise 180 degrees.
2)Flip the retainer clip from front to back. Slide it back into
the slot so that the lip of the retainer is up and the
▼ is
down. The retainer holds the handset in place.