Filter
Top Products
9
Step 3
Preparing the battery pack
Charge the battery pack for more than 12 hours before you start using your phone.
1 Press and slide the battery
compartment cover toward the
bottom of the unit.
2 Connect the battery pack connector
with the correct polarity (black and red
wires), then insert the battery pack
into the battery compartment.
3 Securely close the battery
compartment cover by sliding it up
until it snaps into place.
4 Place the handset on the base
unit with the keys and display facing
upward.
This position lets you see Caller ID
messages on the display.
When the handset has been properly
placed on the charging terminals of
the base unit, the "
status
" lamp of the
base unit lights and charging begins.
Charge the battery for at least 15
hours.
You can place either side up for charg-
ing the battery.
Red
status
lamp
Black
Total:00
Getting Started
EXLI 8962 6th 99.8.20 3:25 PM Page 9